The RonaTMFlow multi-layer depth filter cartridge, is
manufactured with four different polypropylene grades
of fibres.
The multi-layer structure of the RonaTMFlow depth cartridge
is produced with fine fibers in the inner layer and increases
to course fibers in the outer layer resulting in four
different grades.
This design has high contaminant holding capacity,
therefore the filter has a longer service life.
The unique structure of the RonaTMFlow offers a high
quality cartridge at a low cost.
Features & Benefits
- Lower pressure drop
- High contaminate retention
- Four-layer structure cartridge
- Increased filter service life
- Micro-Denier melt-blown filtration fiber
- 100% polypropylene for compatibility with a wide
range of process fluids
- Formed by thermal bond without use of any binders and
adhesives
- Certified by NSF42 and FDA CFR Title 21
Operating Conditions
- Maximum forward pressure drop
2.1 kg/cm² @ 60°C
4.2 kg/cm² @ 20°C
Recommended replaceable pressure drop 1.5 kg/cm²
Maximum operating temperature 60°C
Applications of Product
Electroplating, etching and image development processes in PCB industry.
Filtration of electroplating fluid in conventional electroplating industry.
Pre-filter of DI & RO water filtration system for industry.
Filtration of low viscosity fluids of chemical.
Filtration of water for manufacturing processes and recycled water.
Product Specifications
Micron ratings nominal 0.5, 1, 3, 5, 10, 25, 50, 75, 100 micron
Materials of construction 100% melt-blown micro-denier polypropylene fiber
Length 9.87" 10" 20" 30" 40"
251 mm 254 mm 508 mm 762 mm 1016 mm
Inner diameter 28 mm
Outer diameter 63 mm
