RonaTMPleat

Constructed of melt-blown polypropylene fiber media,
Rona Pleat pleated filter combines exceptional solids holding
capacities with precise micron ratings.
The double sheets of melt-blown media are layered to provide
absolute particle retention, high solid loading and long
service life. Rona Pleat filters are also suited for membrane's
pre-filtration.

Features & Benefits

- Double-layer structure, absolute efficiency
filter. (Absolute rating 99.9% ； β rate=1000)
- low pressure drop, high capacity of dust and long service life.
- 100% PP for compatibility with a wide range of process fluids.
- Manufactured in clean environment, highly clean cartridge.
- Pre-flush with 18 Megohm-cm DI water, TOC content is lower than 40 ppb.
- End caps and connectors sealed by thermal bond, free of binder.
- Certificated by USP XXXIII and FDA CFR Title 21.
- End configurations to fit all standard housings.

Operating Conditions

Maximum operating forward pressure
90°C：1.4 kg/cm²
60°C：2.8 kg/cm²
20°C：4.9 kg/cm²
Recommended replaceable pressure drop ：2.5 kg/cm²
Maximum operating temperature： 90°C
Sterilization:：121°C, 30 min 10 times

Applications of Product

- Pre-filtration.
- Filtration of cleaning process
- Pre-filter of DI water filtration.
- Filtration of cooling water system (PCW).
- Clarification of beer or beverage manufacture.
- Filtration of medium & low viscosity fluids of chemical.

Product Specifications

Micron Ratings: Absolute Rating 0.2, 0.45,
1, 5, 10, 20, 50 micron
Materials of construction： 100% meltblown
micro-denier PP fiber
Support layer PP fiber
End Cap & Core:： High Strength PP
O-ring Material:： EPDM, Buan N,
Silicone, Viton, Viton encapsulated PFA
Filtration Area ： >0.4m²
Length ：10”, 20”, 30”, 40”
Inner Diameter: 28 mm
Outer Diameter:：69 mm
Retention Efficiency - <99.9% under muti-pass test